If you are unsure about the availability of our services or are planning to upload a very large document (>13,000 words) with a 24 hour deadline, we recommend that you contact us beforehand via chat or email.
If you want the language errors in your footnotes to be corrected by the editor, you can indicate this in step 3 of the upload process. The words in the footnotes are then automatically added to the total word count.
Typing out essays and theses on a computer is obligatory in colleges and universities nowadays. Most academic documents are restricted in length, be it 1,000 or 80,000 words. It's important to stay within the limit, as exceeding the limit can incur a penalty. Similarly, writing too few words can cost you marks [source: City University]. Most people type out their documents in Microsoft Word. However not everyone is familiar with Word's many little tricks. Here's how to count the number of words in your document using Microsoft Word.
In order to count words, the computer has to know what words you want to count. You tell it this information by highlighting the text in question. If this is the entire document, press the Ctrl key and press the A key at the same time. This will highlight the whole text. You can remove your fingers and the text will remain highlighted.
View more statistics: Click the arrows on the right side of the counter at the bottom of the page, then choose an option. You can count characters with or without spaces, total words, paragraphs or pages.
Word tracks many statistics for you: the total number of pages, paragraphs, line, words, and characters. Word distinguishes between the total number of characters in your document with or without including spaces. There might be times when you need to know one or the other, but if you have a need to write a certain number of characters and the requirements don't specify, you can usually assume it's the total number of characters including spaces.
One of the benefits of fields is that you can insert dynamic information within your document. When the field is updated, it is replaced with whatever information is current relative to the field in use. For instance, you can use the NumWords field to insert the number of words in the document. When the field is updated, it is replaced with however many words are then in the document.
If you want to find out the number of words in a section, and have it dynamically placed in a document, then you are out of luck. There is no field that will return this information. You can find it out manually by selecting the text in the section and then choosing the Word Count tool, but that obviously doesn't satisfy the desire to have a value that can be inserted into your document and automatically updated.
This simply steps through each section, determines the word count in that section, and displays the summary information in a message box. This does not provide a way to dynamically insert the information in the document, but it does provide an illustration of how you can find the word count of a single section.
A variation on the technique allows you to automatically insert the word count for a specific section at the location of a bookmark within your document. Let's say that you have a bookmarked called "WordCount" that you have defined. This bookmark specifies the place where you want the number of words in the second section of your document. The following macro will determine the word count for the specified section, and then insert the text at the location of the bookmark.
The macro could be easily called from other macros, such as one that runs when the document is opened, saved, or printed. That way the word count would be updated at all the normal times when a field is automatically updated.
WordTips is your source for cost-effective Microsoft Word training.(Microsoft Word is the most popular word processing software in the world.)This tip (11098) applies to Microsoft Word 2007 and 2010. You can find a version of this tip for the older menu interface of Word here: Word Count for a Section.
You can view word count in Word documents in several ways. Although word count is typically displayed in the Status Bar, you can view a Word Count dialog box which can be displayed using the Ribbon, the Status Bar or a keyboard shortcut. The Word counter will check a document for the number of characters, lines, paragraphs and pages. Word count and other statistics are also available in Word Properties.
In the Word Count dialog box, you can turn a check box off or on to include text boxes, footnotes and endnotes in the word count. This is typically left unchecked. The number of lines in the Word Count dialog box represents the number of lines with characters, not the number of sentences. The number of lines in a document will be affected by formatting such as font size and indents.
Although word count typically displays by default in the Status Bar, you can choose options to display. If you right-click in the Status Bar, a pop-up menu appears. If Word Count has been deselected in this menu, it will not appear in the Status Bar.
Hi dear im an arabic data creator i am formating an arabic book and i want to insert a footnote in arabic numbering format but i cant because ms word does not has arabic numbering formate in footnote it only has1,2,3ا،ب،جI,II,III
I have a word document which was assembled from different other and older versions. In all the pieces were endnotes, sometimes with numbers, sometimes with other symbols like * or **. In the final document all the notes were together in the order of the different parts. But how can I finally renumber all the notes with different symbols to one continuous series of notes? Do I need to do that all manually or is there a trick to do this job automatically?
If you're discussing a literary text throughout your essay, you don't want to overwhelm your document with multiple footnotes for the same work. The first time you refer to the text, create a footnote which includes the full reference as normal. The next time you mention the same work in your text, just provide the relevant line numbers or page references in round brackets () after the quotation or mention. You may also use a shortened form of the title as in the example below. Titles of books included in the text of your written work should be italicized, but not author names.
When writing an essay or a dissertation for English Literature, Creative Writing and Drama, you will usually need to provide a word count. Note that the allowed word length does not include abstract, footnotes/endnotes, bibliography and any appendices but it does include quotations used in the body of the text.
Interested to learn how to insert and format text boxes in Word for Mac 2011? This video will show you how it's done. Whether you're new to Microsoft's popular word processing application, new to MS Word 2011 or even an expert merely looking to brush up on the fundamentals, you're sure to be well served by this quality video tutorial from the folks at Lynda. For all of the details, and to get started using text boxes in your own Mac 2011 projects, watch the video.
I have created a brochure using projects gallery and a template newsletter and intend to email it out. I want to add hyperlinks and have successfully managed to do it by typing in my website address but I also want some of the words within the text boxes in my newsletter to have links which take the reader to other parts of the website.
Microsoft Word is a word processing software developed by Microsoft. It was first released on October 25, 1983, under the name Multi-Tool Word for Xenix systems. Subsequent versions were later written for several other platforms including: IBM PCs running DOS (1983), Apple Macintosh running the Classic Mac OS (1985), AT&T UNIX PC (1985), Atari ST (1988), OS/2 (1989), Microsoft Windows (1989), SCO Unix (1990), macOS (2001), Web browsers (2010), iOS (2014) and Android (2015). Using Wine, versions of Microsoft Word before 2013 can be run on Linux.
In 1981, Microsoft hired Charles Simonyi, the primary developer of Bravo, the first GUI word processor, which was developed at Xerox PARC. Simonyi started work on a word processor called Multi-Tool Word and soon hired Richard Brodie, a former Xerox intern, who became the primary software engineer.
Unlike most MS-DOS programs at the time, Microsoft Word was designed to be used with a mouse. Advertisements depicted the Microsoft Mouse and described Word as a WYSIWYG, windowed word processor with the ability to undo and display bold, italic, and underlined text, although it could not render fonts. It was not initially popular, since its user interface was different from the leading word processor at the time, WordStar. However, Microsoft steadily improved the product, releasing versions 2.0 through 5.0 over the next six years. In 1985, Microsoft ported Word to the classic Mac OS (known as Macintosh System Software at the time). This was made easier by Word for DOS having been designed for use with high-resolution displays and laser printers, even though none were yet available to the general public. It was also notable for its very fast cut-and-paste function and unlimited number of undo operations, which are due to its usage of the piece table data structure.
Following the precedents of LisaWrite and MacWrite, Word for Mac OS added true WYSIWYG features. It fulfilled a need for a word processor that was more capable than MacWrite. After its release, Word for Mac OS's sales were higher than its MS-DOS counterpart for at least four years.
The second release of Word for Mac OS, shipped in 1987, was named Word 3.0 to synchronize its version number with Word for DOS; this was Microsoft's first attempt to synchronize version numbers across platforms. Word 3.0 included numerous internal enhancements and new features, including the first implementation of the Rich Text Format (RTF) specification, but was plagued with bugs. Within a few months, Word 3.0 was superseded by a more stable Word 3.01, which was mailed free to all registered users of 3.0. After MacWrite Pro was discontinued in the mid-1990s, Word for Mac OS never had any serious rivals. Word 5.1 for Mac OS, released in 1992, was a very popular word processor owing to its elegance, relative ease of use, and feature set. Many users say it is the best version of Word for Mac OS ever created. 2b1af7f3a8